澳门尼威斯人游戏

Main parameters

Parameter range

Sample processing:

It can handle 24 samples at the same time in 15 seconds, including liquid nitrogen refrigeration adapters that can be used for 12 and 24 positions

Compatible sample volume:

64*(0.2-0.5ML) /64*2ML /12*(5-15)ML /4*15ML /2*25ML /2*50ML, various specifications of grinding tubes can be customized. 

Touch screen display:

Touch screen display, humanized interactive design, convenient operation, convenient and intuitive operation

Data storage:

Ten groups of experimental data can be stored. According to different experimental samples, animal heart, spleen, lung, kidney, bone, skin, and hair modes are set.

Mode cycle:

According to the set experimental parameters, it can continuously circulate among several set parameters to further reduce the interference of human factors

Open cover operation protection:

electromagnetic lock

Feeding size:

No requirement, adjust according to adapter

Discharge size: 

~5µm

The number of grinding platforms (the number of grinding tanks that can be accepted)

>2

Fastening device with automatic center positioning

Yes, safety lock during work, full protection.

Homogenization speed and time:

0—70 HZ/sec, working time: 0 seconds to 9999 minutes, users can set by themselves;

Speed range:

1000rpm-7000rpm

Diameter of grinding ball:

0.1-30mm

Grinding ball material:

alloy steel, chromium steel, zirconia, tungsten carbide, quartz sand;

Acceleration:

reach a greater speed in 2 seconds

Deceleration:

reach a lower speed in 2 seconds

Noise:

<55db

Refrigeration function:

It has the ability to upgrade to ultra-low temperature liquid nitrogen refrigeration or air refrigerator refrigeration

Grinding method:

wet grinding, dry grinding and low temperature grinding are all available

Adapter material:

Adapter material: PTFE or alloy steel

The adapter can be replaced at will. There are fourteen kinds of adapters to choose from, 0.2ml×96-well plate, 2.0ml×24 adapter, 5.0ml×12 adapter, 15ml×8 adapter, 15ml×8 adapter, 25ml×4 adapter, 50ml ×2 adapter, 2.0ml×48 adapter, 5.0ml×24 adapter, 2.0ml×24 freezing adapter (up to -196 degrees), 5.0ml×12 freezing adapter (up to -196 degrees), 15ml×8 freezing adapter ( Up to -196 degrees), 25ml×2 freezer adapters (up to -196 degrees), 50ml×2 freezer adapters (up to -196 degrees), any specifications can be customized.

The supporting centrifuge tube opening tool can quickly assist the staff to open the centrifuge tube and avoid contamination. And equipped with a beading tool.

Has a number of patents and provides copies of patent certificates.

It is necessary to provide no less than 50 cited papers published on SCI as reference for experimental guidance.

Provide not less than 3 years of instrument warranty.

The product has an inspection certificate issued by an EU-approved testing organization and meets the three major directives MD2006/42/EC, LVD2014/35/EU, EC2014/30/EU and their standards: EN ISO12100:2010, EN 61010-1:2010, EN 61326-1:2013,EN 61000-3-2:2014, EN 61000-3-3:2013